Gema™ MPS® 1F Manual Powder Coating System
Gema™ MPS® 1F Manual Powder Coating System with Full 1 Year Warranty!
-PGC1 Control Unit - Refurbished, Gema™
-OptiSelect GM02 - Refurbished, Gema™
-OptiFlow IG02 - Refurbished, Gema™
-50lb Hopper, Aftermarket, New
-MPS® Stand - Refurbished, Gema™
-Lot of Misc. Tubing, Fittings, Power Cord, Ground Strap, Main Air Regulator, Powder Hose, etc.
Refurbished Gema™ MPS®-1F Hopper Feed Manual Powder Coating System
-First In Finishing is the only company in the industry to offer warranties on refurbished powder coating systems.
- Extended Warranties are available upon request.
MPS® Complete System New Parts
- 20' POE Conductive Color Change Powder Hose
- Dedicated Electrostatic Ground Cable Assembly
- Mains Power Cord Assembly
- Fluidizing Pads on Pickup/Fluidizing Tube Assembly
- Conveying Air Line Assembly
- Supplemental Air Line Assembly
- Fluidizing Air Line Assembly
Refurbished Gema™ PGC (Powder Gun Control) Features
- Gema PGC control unit can be set to any high voltage setting and maintained for different custom parts and profiles.
- 100,000 volts of high voltage to create high first pass transfer efficiency
- Current Operation: Current reading is closed loop signal to assist in powder charging
- LED high voltage electrostatic and current readings provided on a digital scale, eliminating analog variances.
- Opti powder pump is controlled by a custom designed flow valve connected to a conical needle into an orifice that precisely regulates the size of the opening and the air volume of compressed air to the pump. Results in very precise air volume to pump in creating a homogeneous powder cloud designed for part coverage and consistent mill thickness
- Electrode Rinsing Air: Self-cleaning electrode rinsing air volume is controlled by custom designed flow valve for precise air volume to electrode to sufficiently clean electrode during powder coating operation. The rinsing air keeps powder from accumulating on the electrode which can reduce powder charging and attraction to part during powder coating
Refurbished Gema™ OptiSelect® GM02 Powder Coating Gun Features
- Gun is lightweight with soft finger grip handle and ease of maneuverability
- Nozzles and Electrodes are designed to be less intrusive to powder stream and reduce impact fusion thus reducing wear on spare parts and operating costs.
- Rinsing Electrode Air maintains constant low pressure air to tip of electrode to hinder any powder accumulations that could reduce powder charging efficiencies
Refurbished Gema™ OptiSelect® GM02 New Parts
- Flat Spray Nozzle & Electrode Holder, Round Jet Nozzle & Electrode Holder
- 3 Different Sizes Round Jet Deflectors
- Rinsing Air Line & Powder Hose Connector
Refurbished Gema™ OptiFlow® IG02 Powder Pump Features
- Build in check valves for conveying and supplemental air lines to eliminate potential for powder to transport into air supply lines and control unit.
- Simple design Teflon pump insert reduce cost of machining while maintaining long wear life
Refurbished Gema™ OptiFlow® IG02 New Parts
- Pump Insert, Locking Nut, Powder Hose Connector and Pump Mount O-Rings
- Check Valve Kits including ball/spring
New Aftermarket 50lb Hopper Features
-Two 1/4" Feed Mount Fluidization Ports
-Single Pump Mount & Pickup Tube
-3ft of Pressure Vent Relief Hose
Refurbished Gema™ MPS® Stand Features
-Fluidization tube assembly remove vertically for ease of cleaning and color change
-Vibrating table to gently keep powder feeding pickup tube to ensure continuous and smooth powder feed to the spray gun
-Four independent swivel casters for ease of mobility and moving into position
-Integrated into single unit for moving around powder shop as needed
-Built-In Compressed Air Cleaning Wand for cleaning of components and quickness of color change