FIRST IN FINISHING
  • Home
  • About
    • History
    • Contact Us
    • Policies
  • Products
    • Manual Powder Systems >
      • Refurbished Manual Systems >
        • Refurbished Gema™ Powder Gun Control (PGC®)
        • Refurbished Gema™ EasySystem®
        • Refurbished Gema™ OptiTronic®
        • Refurbished Gema™ OptiFlex® 1
        • Refurbished Gema™ OptiFlex2®
    • Automatic Powder Systems >
      • Refurbished Automatic Systems >
        • Gema™ APS® Automatic Powder Systems (Refurbished)
        • Gema™ OptiMatic® Automatic Powder Coating System (Refurbished)
        • Gema™ OptiFlex® Automatic Powder System (Refurbished)
    • Control Units
    • Powder Coating Guns >
      • Manual Powder Guns >
        • Refurbished Manual Guns
        • New Manual Guns
      • Automatic Powder guns >
        • Refurbished Automatic Guns
        • New Automatic Guns
    • Spare Parts >
      • Automatic Guns >
        • Aftermarket PG1-A® Gun
        • Aftermarket PG2-A® Gun
        • Aftermarket OptiGun® GA02 Gun
        • Aftermarket OptiGun® GA03 Gun
      • Manual Guns >
        • Aftermarket PG1® Gun
        • Aftermarket EasySelect® GM01 Gun
        • Aftermarket OptiSelect® GM02 Gun
        • Aftermarket OptiSelect® GM03 Gun
      • Powder Pumps >
        • Aftermarket PI-3® Powder Pump
        • Aftermarket OptiFlow® IG02 Powder Pump
        • Aftermarket OptiFlow® IG06 Powder Pump
      • OptiFlex Systems >
        • OptiFlex B Parts
        • OptiFlex F Parts
      • OptiFlex2 Systems >
        • OptiFlex2 B Parts
        • OptiFlex2 F Parts
    • Powder Hoppers >
      • New Powder Hoppers >
        • 1.5lb Powder Hopper
        • 4lb Powder Hopper
        • 8lb Powder Hopper
        • 10lb Powder Hopper
        • 50lb Black Powder Hopper
        • 50lb Stainless Steel Powder Hopper
        • 150lb Powder Hopper
      • Refurbished Powder Hoppers
    • Pneumatic & Electrical Parts
    • Refurbished Gun Parts >
      • Refurbished Manual Guns >
        • Refurbished Gema™ PG1® Gun
        • Refurbished Gema™ EasySelect® GM01 Gun
      • Refurbished Automatic Guns >
        • Refurbished Gema™ PG1-A® Gun
    • Ancillary Equipment >
      • Refurbished Ancillary Equipment
      • New Ancillary Equipment
    • Special Deals >
      • Gema R14 Hopper (100lb)
      • Gema R24 Hopper (200lb)
      • Gema R36 Hopper (300lb)
    • Gun Movers >
      • Refurbished Waggler Gun Mover
      • Gun Mover Mount Equipment
  • Technical Answers
    • FAQ
    • Common Powder Coating Terms
    • First In Finishing Documents
  • Services
  • Rebuilds
    • PG Series Rebuilds
    • Gema™ OptiGun® Rebuilds
    • Manual Gun Systems Rebuilds
  • Products
  • >
  • Manual Powder Systems
  • >
  • Refurbished Manual Systems
  • >
  • Refurbished Gema™ EasySystem®
  • >
  • Easy 1F Manual Powder Coating System

Easy 1F Manual Powder Coating System

SKU:
$2,495.00
$2,495.00
Unavailable

Easy 1F Manual Powder Coating System with Full 1 Year Warranty!

-EasyTronic® CG01 Refurbished, Gema™​

-EasySelect®​ GM01 Refurbished, Gema™​

-OptiFlow® IG02, Aftermarket, New

-50lb Hopper - Aftermarket, New

-Easy Stand - Refurbished, Gema™​

​​-Lot of Misc. Tubing, Fittings, Power Cord, Ground Strap, Main Air Regulator, Powder Hose, etc. ​​

  • Facebook
  • Twitter
  • Pinterest
  • Google+
Add to Cart

Easy Hopper Feed Manual Powder Coating Unit

-Full 1 Year Warranty on complete system except for wear items.  

-First In Finishing is the only company in the industry to offer warranties on refurbished powder coating systems.  
​
​- Extended Warranties are available upon request.
​
Easy Complete System New Parts
- 20' POE Conductive Color Change Powder Hose

- Dedicated Electrostatic Ground Cable Assembly

- Mains Power Cord Assembly

- Fluidizing Pads on Pickup/Fluidizing Tube Assembly

- Conveying Air Line Assembly

- Supplemental Air Line Assembly

- Fluidizing Air Line Assembly

Refurbished Gema™ EasyTronic® CG01 Features

- 3 Pre-programmed factory electrostatic settings, Flat Part, Complicated Parts and Two-Coat/Recoat Parts

- LED 7-segment display of all powder settings providing fine tuning adjustments on a digital scale, eliminating analog variances.   

- Digital Valve Technology:  Conveying and Supplemental Air Lines connecting to the Opti powder pump are controlled by a stepper motor connected to a conical needle into an orifice and precisely regulates the size of the opening and the air volume of compressed air to the pump.  All settings stored into microprocessor for high precision and repeatability.

- Electrode Rinsing Air:  Self-cleaning electrode rinsing air volume is controlled by 2 preset solenoid valve’s and is preset for precision repeatability and cleaning

​Refurbished Gema™ EasySelect​® GM01 Features

- Manual Powder Gun with maximum voltage for optimum first pass transfer efficiency.  

- Manual Gun has Full On Board Remote Control of Powder Delivery and 3 Pre-programmed factory electrostatic settings. 

- Nozzles and Electrodes are designed to be less intrusive to powder stream and reduce impact fusion thus reducing wear on spare parts and operating costs.

- Rinsing Electrode Air maintains constant low pressure air to tip of electrode to hinder any powder accumulations that could reduce powder charging efficiencies. 


EasySelect Manual Gun New Parts
- Flat Spray Nozzle & Electrode Holder, Round Jet Nozzle &  Electrode Holder

- 3 Different Sizes Round Jet Deflectors

- Rinsing Air Line and Powder Hose Connector

New Aftermarket ​OptiFlow® IG02 Features

- Keyed and Color Coded Conveying and Supplemental Air lines to ensure all air connections are performed correctly during color change and cleaning

- Build in check valves for conveying and supplemental air lines to eliminate potential for powder to transport into air supply lines and control unit.

​- Simple design Teflon pump insert reduce cost of machining while maintaining long wear life

​New Aftermarket 50lb Hopper Features

​-50lb Round Painted Gun-Feed Hopper

-Two 1/4" Feed Mount Fluidization Ports

-Single Pump Mount & Pickup Tube

​-3ft of Pressure Vent Relief Hose

​Refurbished Gema​™ Easy® Stand Features

- Integrated swivel swing arm to assist in powder loading/unloading and color change

- Fluidization tube assembly remove vertically for ease of cleaning and color change

- Tilted Vibrating table to allow more powder to be removed from container while powder coating

- Integrated storage compartment for holding spare parts such as nozzles, inserts, cleaning brush, etc.

- Large back wheels for ease of movement with small swivel front wheels for mobility

- Integrated into single unit with grab handle for moving around powder shop as needed

Home

About

Products

Technical Answers

Contact Us

First in Finishing is an Integrator of Gema Products not a Gema Distributor

*Gema is a registered trademark of Gema Switzerland GmbH

Picture
Copyright © 2016
  • Home
  • About
    • History
    • Contact Us
    • Policies
  • Products
    • Manual Powder Systems >
      • Refurbished Manual Systems >
        • Refurbished Gema™ Powder Gun Control (PGC®)
        • Refurbished Gema™ EasySystem®
        • Refurbished Gema™ OptiTronic®
        • Refurbished Gema™ OptiFlex® 1
        • Refurbished Gema™ OptiFlex2®
    • Automatic Powder Systems >
      • Refurbished Automatic Systems >
        • Gema™ APS® Automatic Powder Systems (Refurbished)
        • Gema™ OptiMatic® Automatic Powder Coating System (Refurbished)
        • Gema™ OptiFlex® Automatic Powder System (Refurbished)
    • Control Units
    • Powder Coating Guns >
      • Manual Powder Guns >
        • Refurbished Manual Guns
        • New Manual Guns
      • Automatic Powder guns >
        • Refurbished Automatic Guns
        • New Automatic Guns
    • Spare Parts >
      • Automatic Guns >
        • Aftermarket PG1-A® Gun
        • Aftermarket PG2-A® Gun
        • Aftermarket OptiGun® GA02 Gun
        • Aftermarket OptiGun® GA03 Gun
      • Manual Guns >
        • Aftermarket PG1® Gun
        • Aftermarket EasySelect® GM01 Gun
        • Aftermarket OptiSelect® GM02 Gun
        • Aftermarket OptiSelect® GM03 Gun
      • Powder Pumps >
        • Aftermarket PI-3® Powder Pump
        • Aftermarket OptiFlow® IG02 Powder Pump
        • Aftermarket OptiFlow® IG06 Powder Pump
      • OptiFlex Systems >
        • OptiFlex B Parts
        • OptiFlex F Parts
      • OptiFlex2 Systems >
        • OptiFlex2 B Parts
        • OptiFlex2 F Parts
    • Powder Hoppers >
      • New Powder Hoppers >
        • 1.5lb Powder Hopper
        • 4lb Powder Hopper
        • 8lb Powder Hopper
        • 10lb Powder Hopper
        • 50lb Black Powder Hopper
        • 50lb Stainless Steel Powder Hopper
        • 150lb Powder Hopper
      • Refurbished Powder Hoppers
    • Pneumatic & Electrical Parts
    • Refurbished Gun Parts >
      • Refurbished Manual Guns >
        • Refurbished Gema™ PG1® Gun
        • Refurbished Gema™ EasySelect® GM01 Gun
      • Refurbished Automatic Guns >
        • Refurbished Gema™ PG1-A® Gun
    • Ancillary Equipment >
      • Refurbished Ancillary Equipment
      • New Ancillary Equipment
    • Special Deals >
      • Gema R14 Hopper (100lb)
      • Gema R24 Hopper (200lb)
      • Gema R36 Hopper (300lb)
    • Gun Movers >
      • Refurbished Waggler Gun Mover
      • Gun Mover Mount Equipment
  • Technical Answers
    • FAQ
    • Common Powder Coating Terms
    • First In Finishing Documents
  • Services
  • Rebuilds
    • PG Series Rebuilds
    • Gema™ OptiGun® Rebuilds
    • Manual Gun Systems Rebuilds