


Click/Touch Any Part You Are Trying To Find
E-Feed V3 Powder Coating Pump

E-Feed V2 Powder Coating Pump

E-Feed AP Powder Coating Pump
-1.png)
E-FEED AP SERIES
▪Easy maintenance (Easy change able manifold design)
▪400gr/min maximum powder output (single operation)
▪700gr/min maximum powder output(dual operation)
▪No performance decrease
▪Constant powder output
▪Constant coating thickness
▪Constant powder savings
▪Repeatable coating results
▪Constant quality
▪Ideal powder charging in all conditions
▪Highest transfer efficiency
▪Linear powder flow
▪ATEX||3D protection
Click/Touch Any Part You Are Trying To Find
E-Feed HD Powder Coating Pump
-1.jpg)
E-FEED HD SERIES
POWDER TRANSFER PUMP
E-FEED HD is a pneumatic pump transferring powder coating from one station to another with very high efficiency. It works according to “high density, low velocity” principle and consists of two sections; a “Powder Transfer Unit” and a “Control Panel”. E-FEED HD holds the number spot for being the highest transfer rate among competitors with 7, 9 kg/min. transfer capacity. Through this high transfer capacity, total needed working time is reduced and lifetime of replacement parts is maximized. It has an ultra fast self-cleaning function which provides cleaning in a few seconds by the help of smooth inner surface and special material used. Replacement parts are changeable without stopping the pump by the help of quick connection design of replacement to the body of unit.
Some functions of the unit;
-
Transfer Pressure Adjustment
-
Vacuum Pressure Adjustment
-
7,9 kg/min. powder transfer capacity
-
Fast change of replacement parts
-
Timer for replacement parts lifetime
-
Control of output current and process with "Check Manometer"
-
Control option by its own control panel or adaptable to any otherindustrial automation system
-
2 levels of pumping frequency selection
-
Powder level sensor adaptable
-
Dual transfer capability in both directions (top/down, down/top)
-
Fluidizing output
-
ATEX II 3D, IP54 Protection Class
