Gema™ APS® Automatic Powder Coating System (Refurbished)
--> 1-12 Gema™ Powder Gun Control® (PGC) Automatic Control Units (Refurbished)
--> 1-12 Gema™ OptiGun® (GA02) Automatic Powder Guns (Refurbished)
--> 1-12 Gema™ OptiFlow® (IG02) Powder Pumps (Refurbished)
--> Includes Supporting Airlines, Fittings, Power Cables (New)
This Powder Coating System Comes with a 2 Year Warranty
$1,895 each per Automatic Gun/Control Package
- Automatic Gun Package includes (1) Gema PGC Powder Gun Control, (1) Gema OptiGun GA02, (1) Gema OptiFlow IG02 Pump, and all supporting pneumatic, electrical, and mounting hardware
Gema PGC Automatic Control Units (Refurbished)
- Over 200 Custom Programs or Recipes to fit individualized custom settings for high voltage, current and powder delivery.
- Programs 1-3 are Preset as Factory Application Settings for Flat Part, Complicated Parts and Two-Coat/Recoat Parts
- High Voltage Control: Full 0-100,000 volts control of high voltage to allow high first pass transfer efficiency
- Current Control: Full 0-100,000 micro amp control with current limiting to overcome hard to access/faraday areas. Current limiting takes your coating to the next level.
- LED 7-segment display of all electrostatic and powder settings providing fine tuning adjustments on a digital scale, eliminating analog variances.
- Digital Flow Valve Technology: Conveying and Supplemental Air Lines connected to the Opti powder pump are controlled by a stepper motor connected to a conical needle into an orifice and precisely regulates the size of the opening and the air volume of compressed air to the pump. All settings stored into microprocessor for high precision and repeatability.
- Electrode Rinsing Air: Self-cleaning electrode rinsing air volume is controlled by Digital Flow Valve Technology and is preset for precision repeatability and cleaning
- Programs 1-3 are Preset as Factory Application Settings for Flat Part, Complicated Parts and Two-Coat/Recoat Parts
- High Voltage Control: Full 0-100,000 volts control of high voltage to allow high first pass transfer efficiency
- Current Control: Full 0-100,000 micro amp control with current limiting to overcome hard to access/faraday areas. Current limiting takes your coating to the next level.
- LED 7-segment display of all electrostatic and powder settings providing fine tuning adjustments on a digital scale, eliminating analog variances.
- Digital Flow Valve Technology: Conveying and Supplemental Air Lines connected to the Opti powder pump are controlled by a stepper motor connected to a conical needle into an orifice and precisely regulates the size of the opening and the air volume of compressed air to the pump. All settings stored into microprocessor for high precision and repeatability.
- Electrode Rinsing Air: Self-cleaning electrode rinsing air volume is controlled by Digital Flow Valve Technology and is preset for precision repeatability and cleaning
Gema OptiGun (GA02) Automatic Powder Coating Guns (Refurbished)
Gema™ OptiGun® GA02 Automatic Powder Coating Refurbished Gun Kit Features
- 100kV Integrated Cascade for High First Pass Transfer Efficiency
- 11mm ID Powder Tube Path wit Powder Hose Quick Disconnect
- 6mm Electrode Rinsing Air Line for Continuous Cleaning of High Voltage Electrode
- Single Body Gun for Smaller Profile to Fit into Tight Spaces and Powder Booth
- Includes 11 Meter Long High Voltage Gun Cable
Gema™ OptiGun® GA02 Automatic Powder Coating Refurbished Gun Kit
- Gun Kits have been Completely Refurbished entailing the following process's:
- Complete disassembly of each gun including powder tube and connector
- Angle Mount/Support Bracket with connection points has been removed, cleaned and painted
- All flat spray nozzles and electrode holder have been removed and discarded for new parts
- Rinsing assemblies have been discarded for new assemblies
- Gun Cable has been cleaned and fully tested for continuity and connections
- Gun cascade has been load tested for more than 8 continuous hours to ensure full output of high voltage cascade
Gema™ OptiGun® GA02 Automatic Powder Coating Refurbished Gun Kit NEW ITEMS
- New Flat Spray Nozzle Assembly including Electrode Holder and 15mm Flat Spray Nozzle
- New Threaded Sleeve
- New Powder Hose Connector and Quick Disconnect
- New 6mm Rinsing Air Line and 6mm Quick Disconnect
- 100kV Integrated Cascade for High First Pass Transfer Efficiency
- 11mm ID Powder Tube Path wit Powder Hose Quick Disconnect
- 6mm Electrode Rinsing Air Line for Continuous Cleaning of High Voltage Electrode
- Single Body Gun for Smaller Profile to Fit into Tight Spaces and Powder Booth
- Includes 11 Meter Long High Voltage Gun Cable
Gema™ OptiGun® GA02 Automatic Powder Coating Refurbished Gun Kit
- Gun Kits have been Completely Refurbished entailing the following process's:
- Complete disassembly of each gun including powder tube and connector
- Angle Mount/Support Bracket with connection points has been removed, cleaned and painted
- All flat spray nozzles and electrode holder have been removed and discarded for new parts
- Rinsing assemblies have been discarded for new assemblies
- Gun Cable has been cleaned and fully tested for continuity and connections
- Gun cascade has been load tested for more than 8 continuous hours to ensure full output of high voltage cascade
Gema™ OptiGun® GA02 Automatic Powder Coating Refurbished Gun Kit NEW ITEMS
- New Flat Spray Nozzle Assembly including Electrode Holder and 15mm Flat Spray Nozzle
- New Threaded Sleeve
- New Powder Hose Connector and Quick Disconnect
- New 6mm Rinsing Air Line and 6mm Quick Disconnect
Gema OptiFlow (IG02) Powder Pumps (Refurbished)
- Powder pump conveying nozzle placement is centered over pickup tube assembly to ensure the least air volume per powder particle transport on the market today
- Conveying Nozzle orifice is 1.3mm to maintain low air to powder ratios during powder transportation through powder hose and spray gun
- Keyed and Color Coded Conveying and Supplemental Air lines to ensure all air connections are performed correctly during color change and cleaning
- Build in check valves for conveying and supplemental air lines to eliminate potential for powder to transport into air supply lines and control unit.
- Barbed powder hose connector for simple make/break connection point
- Large pitch, ¾ turn connecting knob for powder hose to pump for fast and simple cleaning and color change
- Simple design Teflon pump insert reduce cost of machining while maintaining long wear life
- Conveying Nozzle orifice is 1.3mm to maintain low air to powder ratios during powder transportation through powder hose and spray gun
- Keyed and Color Coded Conveying and Supplemental Air lines to ensure all air connections are performed correctly during color change and cleaning
- Build in check valves for conveying and supplemental air lines to eliminate potential for powder to transport into air supply lines and control unit.
- Barbed powder hose connector for simple make/break connection point
- Large pitch, ¾ turn connecting knob for powder hose to pump for fast and simple cleaning and color change
- Simple design Teflon pump insert reduce cost of machining while maintaining long wear life
Supporting Equipment (New)
- 20' POE Conductive Color Change Powder Hose
- Ground Cable Assembly and Mains Power Cord Assembly
- Conveying, Supplemental, Fluidizing Air Line Assembly
- Ground Cable Assembly and Mains Power Cord Assembly
- Conveying, Supplemental, Fluidizing Air Line Assembly