FIRST IN FINISHING
  • Home
  • About
    • History
    • Contact Us
    • Policies
  • Products
    • Manual Powder Systems >
      • Refurbished Manual Systems >
        • Refurbished Gema™ Powder Gun Control (PGC®)
        • Refurbished Gema™ EasySystem®
        • Refurbished Gema™ OptiTronic®
        • Refurbished Gema™ OptiFlex® 1
        • Refurbished Gema™ OptiFlex2®
    • Automatic Powder Systems >
      • Refurbished Automatic Systems >
        • Gema™ APS® Automatic Powder Systems (Refurbished)
        • Gema™ OptiMatic® Automatic Powder Coating System (Refurbished)
        • Gema™ OptiFlex® Automatic Powder System (Refurbished)
    • Control Units
    • Powder Coating Guns >
      • Manual Powder Guns >
        • Refurbished Manual Guns
      • Automatic Powder guns >
        • Refurbished Automatic Guns
    • Spare Parts >
      • Automatic Guns >
        • Aftermarket PG1-A® Gun
        • Aftermarket PG2-A® Gun
        • Aftermarket OptiGun® GA02 Gun
        • Aftermarket OptiGun® GA03 Gun
      • Manual Guns >
        • Aftermarket PG1® Gun
        • Aftermarket EasySelect® GM01 Gun
        • Aftermarket OptiSelect® GM02 Gun
        • Aftermarket OptiSelect® GM03 Gun
      • Powder Pumps >
        • Aftermarket PI-3® Powder Pump
        • Aftermarket OptiFlow® IG02 Powder Pump
        • Aftermarket OptiFlow® IG06 Powder Pump
        • Transfer Pump (Bulk Feed)
      • OptiFlex Systems >
        • OptiFlex B Parts
        • OptiFlex F Parts
      • OptiFlex2 Systems >
        • OptiFlex2 B Parts
        • OptiFlex2 F Parts
    • Powder Hoppers >
      • New Powder Hoppers >
        • 1.5lb Powder Hopper
        • 4lb Powder Hopper
        • 8lb Powder Hopper
        • 10lb Powder Hopper
        • 50lb Black Powder Hopper
        • 50lb Stainless Steel Powder Hopper
        • 150lb Powder Hopper
      • Refurbished Powder Hoppers
    • Pneumatic & Electrical Parts
    • Refurbished Gun Parts >
      • Refurbished Manual Guns >
        • Refurbished Gema™ PG1® Gun
        • Refurbished Gema™ EasySelect® GM01 Gun
      • Refurbished Automatic Guns >
        • Refurbished Gema™ PG1-A® Gun
    • Ancillary Equipment >
      • Refurbished Ancillary Equipment
      • New Ancillary Equipment
    • Special Deals >
      • Gema R14 Hopper (100lb)
      • Gema R24 Hopper (200lb)
      • Gema R36 Hopper (300lb)
      • Koch Filter
    • Gun Movers >
      • Refurbished Waggler Gun Mover
      • Gun Mover Mount Equipment
  • Technical Answers
    • FAQ
    • Common Powder Coating Terms
    • First In Finishing Documents
  • Financing
  • Services
  • Rebuilds
    • PG Series Rebuilds
    • Gema™ OptiGun® Rebuilds
    • Manual Gun Systems Rebuilds
  • Category
  • Gallery
  • Products
  • >
  • Pneumatic & Electrical Parts
All Pneumatic and Electrical Parts Listed are Aftermarket Parts for GemaTM Equipment

Pneumatic & Electrical Parts

135533A or 105139A - Hose, Powder, POE, 11/16, Type 66
$2.95
$2.95
1001674A - 12/18 Type 75 POE Powder Hose
$2.95
$2.95
105372A - 7/16" ID x 5/8" OD PVC Powder Hose
$0.69
$0.69
5124 - Hose, Powder, POE, 19mm x 25mm
$3.95
$3.95
106475A - Tubing, Poly, Red, 6mm OD x 4mm ID
$0.90
$0.90
106618A or 103500A - Tubing, Poly, Red, 8mm OD x 6mm ID, PGC
$1.49
$1.49
118057A or 103756A - Tubing, Poly, Black, 8mm OD x 6mm ID
$1.49
$1.49
110318A or 1001973A - Tubing, Poly, Black, 6mm OD x 4mm ID​, Aftermarket. This tubing is sold in feet. 1 Roll = 100ft
$1.20
$1.60
110801A or 103144A - 0.219" x 0.125" ID Rinsing Tubing
$0.79
$0.79
110811A - Rinsing Air Tubing Assy
$29.95
$29.95
Hopper Fluidization Assy for 1.5lb, 4lb, 8lb, & 10lb
$74.95
$74.95
Hopper Extension Kit
$59.95
$59.95
110178A - Ftg, Spring Guard, 8mm, Aftermarket
$9.95
$9.95
107082A - Ftg, Spring Guard, 6mm, Aftermarket
$9.95
$9.95
261645A - Ftg, QD, Conv, Red, IG02
$21.95
$21.95
261637A - Ftg, QD, Supp, Black, IG02
$21.95
$21.95
106541A or 203181A - Ftg, QD, 8mm w/Spring Guard, PGC
$21.95
$21.95
106539A or 200859A - 1/8" Male QD
$4.90
$4.90
5032 - Ftg, Nipple, 1/8" BSPTM x2, Closed
$4.00
$4.00
5121 - Filter, Main Air, 1/4" MNPT Inlet/Outlet, 10 SCFM
$14.95
$14.95
382507A - Power Cable for all Gema Control Units
$24.95
$24.95
5126 - Cable, Power, With AC Plug, No Din Plug
$12.95
$12.95
5128 - 12 AWG Single Conductor Copper Wire
$0.99
$0.99
5005 - Clamp, Alligator, 1/2", 10-12Awg, 12-28lbs
$4.95
$4.95
1000400A - Front Panel Screw for OptiStar® CG07
$1.95
$1.95
5119 - Power Cable Screw
$0.29
$0.29
5120 - Terminal, Ring, Cable, 10-14 AWG, 1/4" In
$0.29
$0.29
5022 - Gasket, AC Receptacle, Gema Control Unit
$1.99
$1.99
5123 - AC Plug Gasket for Gema Control Units
$1.99
$1.99
5127 - Plug, Female, Power, Din 43650A, Gema Control Units
$12.95
$12.95
301140A - Cable Assembly, Ground, 6m, Ring Terminal TO Alligator Clamp, Aftermarket
$24.95
$24.95

Home

About

Products

Technical Answers

Contact Us

First in Finishing is an Integrator of Gema Products not a Gema Distributor

*Gema is a registered trademark of Gema Switzerland GmbH
​
First In Finishing
Monte - 317-439-9019 - System Sales, Tech. Support and Engineering
Courtney - 317-483-3361 - Spare Parts/Website Orders and Accounting

Picture
Copyright © 2016
  • Home
  • About
    • History
    • Contact Us
    • Policies
  • Products
    • Manual Powder Systems >
      • Refurbished Manual Systems >
        • Refurbished Gema™ Powder Gun Control (PGC®)
        • Refurbished Gema™ EasySystem®
        • Refurbished Gema™ OptiTronic®
        • Refurbished Gema™ OptiFlex® 1
        • Refurbished Gema™ OptiFlex2®
    • Automatic Powder Systems >
      • Refurbished Automatic Systems >
        • Gema™ APS® Automatic Powder Systems (Refurbished)
        • Gema™ OptiMatic® Automatic Powder Coating System (Refurbished)
        • Gema™ OptiFlex® Automatic Powder System (Refurbished)
    • Control Units
    • Powder Coating Guns >
      • Manual Powder Guns >
        • Refurbished Manual Guns
      • Automatic Powder guns >
        • Refurbished Automatic Guns
    • Spare Parts >
      • Automatic Guns >
        • Aftermarket PG1-A® Gun
        • Aftermarket PG2-A® Gun
        • Aftermarket OptiGun® GA02 Gun
        • Aftermarket OptiGun® GA03 Gun
      • Manual Guns >
        • Aftermarket PG1® Gun
        • Aftermarket EasySelect® GM01 Gun
        • Aftermarket OptiSelect® GM02 Gun
        • Aftermarket OptiSelect® GM03 Gun
      • Powder Pumps >
        • Aftermarket PI-3® Powder Pump
        • Aftermarket OptiFlow® IG02 Powder Pump
        • Aftermarket OptiFlow® IG06 Powder Pump
        • Transfer Pump (Bulk Feed)
      • OptiFlex Systems >
        • OptiFlex B Parts
        • OptiFlex F Parts
      • OptiFlex2 Systems >
        • OptiFlex2 B Parts
        • OptiFlex2 F Parts
    • Powder Hoppers >
      • New Powder Hoppers >
        • 1.5lb Powder Hopper
        • 4lb Powder Hopper
        • 8lb Powder Hopper
        • 10lb Powder Hopper
        • 50lb Black Powder Hopper
        • 50lb Stainless Steel Powder Hopper
        • 150lb Powder Hopper
      • Refurbished Powder Hoppers
    • Pneumatic & Electrical Parts
    • Refurbished Gun Parts >
      • Refurbished Manual Guns >
        • Refurbished Gema™ PG1® Gun
        • Refurbished Gema™ EasySelect® GM01 Gun
      • Refurbished Automatic Guns >
        • Refurbished Gema™ PG1-A® Gun
    • Ancillary Equipment >
      • Refurbished Ancillary Equipment
      • New Ancillary Equipment
    • Special Deals >
      • Gema R14 Hopper (100lb)
      • Gema R24 Hopper (200lb)
      • Gema R36 Hopper (300lb)
      • Koch Filter
    • Gun Movers >
      • Refurbished Waggler Gun Mover
      • Gun Mover Mount Equipment
  • Technical Answers
    • FAQ
    • Common Powder Coating Terms
    • First In Finishing Documents
  • Financing
  • Services
  • Rebuilds
    • PG Series Rebuilds
    • Gema™ OptiGun® Rebuilds
    • Manual Gun Systems Rebuilds
  • Category
  • Gallery