FIRST IN FINISHING
  • Home
  • About
    • History
    • Contact Us
    • Policies
  • Products
    • Manual Powder Systems >
      • Refurbished Manual Systems >
        • Refurbished Gema™ Powder Gun Control (PGC®)
        • Refurbished Gema™ EasySystem®
        • Refurbished Gema™ OptiTronic®
        • Refurbished Gema™ OptiFlex® 1
        • Refurbished Gema™ OptiFlex2®
    • Automatic Powder Systems >
      • Refurbished Automatic Systems >
        • Gema™ APS® Automatic Powder Systems (Refurbished)
        • Gema™ OptiMatic® Automatic Powder Coating System (Refurbished)
        • Gema™ OptiFlex® Automatic Powder System (Refurbished)
    • Control Units
    • Powder Coating Guns >
      • Manual Powder Guns >
        • Refurbished Manual Guns
      • Automatic Powder guns >
        • Refurbished Automatic Guns
    • Spare Parts >
      • Automatic Guns >
        • Aftermarket PG1-A® Gun
        • Aftermarket PG2-A® Gun
        • Aftermarket OptiGun® GA02 Gun
        • Aftermarket OptiGun® GA03 Gun
      • Manual Guns >
        • Aftermarket PG1® Gun
        • Aftermarket EasySelect® GM01 Gun
        • Aftermarket OptiSelect® GM02 Gun
        • Aftermarket OptiSelect® GM03 Gun
      • Powder Pumps >
        • Aftermarket PI-3® Powder Pump
        • Aftermarket OptiFlow® IG02 Powder Pump
        • Aftermarket OptiFlow® IG06 Powder Pump
        • Transfer Pump (Bulk Feed)
      • OptiFlex Systems >
        • OptiFlex B Parts
        • OptiFlex F Parts
      • OptiFlex2 Systems >
        • OptiFlex2 B Parts
        • OptiFlex2 F Parts
    • Powder Hoppers >
      • New Powder Hoppers >
        • 1.5lb Powder Hopper
        • 4lb Powder Hopper
        • 8lb Powder Hopper
        • 10lb Powder Hopper
        • 50lb Black Powder Hopper
        • 50lb Stainless Steel Powder Hopper
        • 150lb Powder Hopper
      • Refurbished Powder Hoppers
    • Pneumatic & Electrical Parts
    • Refurbished Gun Parts >
      • Refurbished Manual Guns >
        • Refurbished Gema™ PG1® Gun
        • Refurbished Gema™ EasySelect® GM01 Gun
      • Refurbished Automatic Guns >
        • Refurbished Gema™ PG1-A® Gun
    • Ancillary Equipment >
      • Refurbished Ancillary Equipment
      • New Ancillary Equipment
    • Special Deals >
      • Gema R14 Hopper (100lb)
      • Gema R24 Hopper (200lb)
      • Gema R36 Hopper (300lb)
      • Koch Filter
    • Gun Movers >
      • Refurbished Waggler Gun Mover
      • Gun Mover Mount Equipment
  • Technical Answers
    • FAQ
    • Common Powder Coating Terms
    • First In Finishing Documents
  • Financing
  • Services
  • Rebuilds
    • PG Series Rebuilds
    • Gema™ OptiGun® Rebuilds
    • Manual Gun Systems Rebuilds
  • Category
  • Gallery
  • Products
  • >
  • Ancillary Equipment
  • >
  • Refurbished Ancillary Equipment
  • >
  • 122422R (GEMA™) Rotary Sieve, complete, Refurbished

122422R (GEMA™) Rotary Sieve, complete, Refurbished

SKU: 122422
$1,495.00
$1,495.00
Unavailable
per item
GEMA™ Rotary Sieve Complete, Refurbished
- Performs conditioning and separation of virgin and/or reclaim powder.
- Operates from 120VAC, 5amp Source 
- Pneumatic Bearing AIr Seal for Long Life
- Helix Scroll Design for Powder Shifting
- High Volume Throughput for multi-gun Automatic Powder Coating System
  • Facebook
  • Twitter
  • Pinterest
  • Google+
Sold Out
Add to Cart

Gema Rotary Sieve Operation


Powder is fed into the inlet section of the sieve body (2). The auger section of the rotor (4) then transports the material from the inlet into the screen assembly. 
At this point, the helical blades of the rotor propel the powder against the Nitex screen (28). Fine product passes through the screen into the primary discharge. 
Material too coarse to pass through is retained within the screen, where the helical blades move this waste material to the oversize discharge. 
During operation the rotor creates a slight positive pressure within the housing. It is recommended that the oversize discharge to an oversize bag be sealed air tight 
with proper hose clamp. This will minimize the amount of fine powder that may be blown from the screen area into the scrap bag. The Rotary Sieve centrifugal 
screening action allows greater throughput capacity per unit of screening area by the high level of centrifugal force, which helps the product pass through the screen 
efficiently, and the speeding action of the rotor, which distributes the product around the entire screen perimeter. The centrifugal force of the product being thrown against the 
screen causes it to flex, therefore cleaning itself. This eliminates the need for an additional cleaning media, which may contaminate the product and also reduces down time caused by 
screen blinding

Home

About

Products

Technical Answers

Contact Us

First in Finishing is an Integrator of Gema Products not a Gema Distributor

*Gema is a registered trademark of Gema Switzerland GmbH
​
First In Finishing
Monte - 317-439-9019 - System Sales, Tech. Support and Engineering
Courtney - 317-483-3361 - Spare Parts/Website Orders and Accounting

Picture
Copyright © 2016
  • Home
  • About
    • History
    • Contact Us
    • Policies
  • Products
    • Manual Powder Systems >
      • Refurbished Manual Systems >
        • Refurbished Gema™ Powder Gun Control (PGC®)
        • Refurbished Gema™ EasySystem®
        • Refurbished Gema™ OptiTronic®
        • Refurbished Gema™ OptiFlex® 1
        • Refurbished Gema™ OptiFlex2®
    • Automatic Powder Systems >
      • Refurbished Automatic Systems >
        • Gema™ APS® Automatic Powder Systems (Refurbished)
        • Gema™ OptiMatic® Automatic Powder Coating System (Refurbished)
        • Gema™ OptiFlex® Automatic Powder System (Refurbished)
    • Control Units
    • Powder Coating Guns >
      • Manual Powder Guns >
        • Refurbished Manual Guns
      • Automatic Powder guns >
        • Refurbished Automatic Guns
    • Spare Parts >
      • Automatic Guns >
        • Aftermarket PG1-A® Gun
        • Aftermarket PG2-A® Gun
        • Aftermarket OptiGun® GA02 Gun
        • Aftermarket OptiGun® GA03 Gun
      • Manual Guns >
        • Aftermarket PG1® Gun
        • Aftermarket EasySelect® GM01 Gun
        • Aftermarket OptiSelect® GM02 Gun
        • Aftermarket OptiSelect® GM03 Gun
      • Powder Pumps >
        • Aftermarket PI-3® Powder Pump
        • Aftermarket OptiFlow® IG02 Powder Pump
        • Aftermarket OptiFlow® IG06 Powder Pump
        • Transfer Pump (Bulk Feed)
      • OptiFlex Systems >
        • OptiFlex B Parts
        • OptiFlex F Parts
      • OptiFlex2 Systems >
        • OptiFlex2 B Parts
        • OptiFlex2 F Parts
    • Powder Hoppers >
      • New Powder Hoppers >
        • 1.5lb Powder Hopper
        • 4lb Powder Hopper
        • 8lb Powder Hopper
        • 10lb Powder Hopper
        • 50lb Black Powder Hopper
        • 50lb Stainless Steel Powder Hopper
        • 150lb Powder Hopper
      • Refurbished Powder Hoppers
    • Pneumatic & Electrical Parts
    • Refurbished Gun Parts >
      • Refurbished Manual Guns >
        • Refurbished Gema™ PG1® Gun
        • Refurbished Gema™ EasySelect® GM01 Gun
      • Refurbished Automatic Guns >
        • Refurbished Gema™ PG1-A® Gun
    • Ancillary Equipment >
      • Refurbished Ancillary Equipment
      • New Ancillary Equipment
    • Special Deals >
      • Gema R14 Hopper (100lb)
      • Gema R24 Hopper (200lb)
      • Gema R36 Hopper (300lb)
      • Koch Filter
    • Gun Movers >
      • Refurbished Waggler Gun Mover
      • Gun Mover Mount Equipment
  • Technical Answers
    • FAQ
    • Common Powder Coating Terms
    • First In Finishing Documents
  • Financing
  • Services
  • Rebuilds
    • PG Series Rebuilds
    • Gema™ OptiGun® Rebuilds
    • Manual Gun Systems Rebuilds
  • Category
  • Gallery