Gema™ PGC® Kit with 8lb Hopper
Gema™ PGC® Kit with 8lb Hopper with Full 1 Year Warranty!
-PGC1® Control Unit - Refurbished, Gema™
-PG1 Gun - Refurbished, Gema™
-PI-3 Pump - Refurbished, Gema™
-8lb Hopper - Aftermarket, New
-Lot of Misc. Tubing, Fittings, Power Cord, Ground Strap, Main Air Regulator, Powder Hose, etc.
Refurbished Gema™ PGC Kit with 8lb Hopper Manual Powder Coating System
-First In Finishing is the only company in the industry to offer warranties on refurbished powder coating systems.
- Extended Warranties are available upon request.
PGC Kit Complete System New Parts
- 20' POE Conductive Color Change Powder Hose
- Dedicated Electrostatic Ground Cable Assembly
- Mains Power Cord Assembly
- Fluidizing Pads on Pickup/Fluidizing Tube Assembly
- Conveying Air Line Assembly
- Supplemental Air Line Assembly
- Fluidizing Air Line Assembly
Refurbished Gema™ PGC (Powder Gun Control) Features
- Gema PGC control unit can be set to any high voltage setting and maintained for different custom parts and profiles.
- 100,000 volts of high voltage to create high first pass transfer efficiency
- Current Operation: Current reading is closed loop signal to assist in powder charging
- LED high voltage electrostatic and current readings provided on a digital scale, eliminating analog variances.
- Opti powder pump is controlled by a custom designed flow valve connected to a conical needle into an orifice that precisely regulates the size of the opening and the air volume of compressed air to the pump. Results in very precise air volume to pump in creating a homogeneous powder cloud designed for part coverage and consistent mill thickness
- Electrode Rinsing Air: Self-cleaning electrode rinsing air volume is controlled by custom designed flow valve for precise air volume to electrode to sufficiently clean electrode during powder coating operation. The rinsing air keeps powder from accumulating on the electrode which can reduce powder charging and attraction to part during powder coating
Refurbished Gema™ PG1® Manual Powder Coating Gun
Refurbished Gema™ PI-3® Powder Pump
New Aftermarket 8lb Hopper Features
-Two 1/4" Feed Mount Fluidization Ports
-Single Pump Mount & Pickup Tube
-3ft of Pressure Vent Relief Hose